Training HSE
By January 28, 20110 Comments Read More →

FORMATION DAMAGE AND WELL STIMULATION

FORMATION DAMAGE AND WELL STIMULATION
Hotel Grand Seriti Boutique Bandung |  20 – 23 June 2011 | Rp 7.250.000/person
Hotel Grand Seriti Boutique Bandung |  28 November – 1 December 2011 | Rp 7.250.000/person

TRAINING MATERIAL OUTLINE :

  1. Basic Introduction of Formation Damage and Hydrocarbon Well Stimulation
    • a.    Damage caused by drilling mud
    • b.    Damage caused by production well system
    • c.    Damage caused by Well Geometry
    • d.    Well damage modeling
  2. Damage Measurement and Quantification System
    • a.    Pressure Built Up Test
    • b.    Pressure Drawdown Test
    • c.    Multirate Test
  3. Rock Mechanics and Reservoir Fluids
    • a.    Insitu Stress
    • b.    Overburden Stress
    • c.    Flow Reign and Fluid Rheology
  4. Acidizing Techniques
    • a.    Well Test basic principal
    • b.    Fluid flows in porous media
    • c.    Well Test types
  5. Acid Chemical Reaction and Reservoir Acid Rocks
    • a.    Acid reaction with Carbonate Rocks
    • b.    Acid flow to Mineral Surface
    • c.    Acid spreading into the rocks
  6. Additives in Acidizing
    • a.    Surfactant
    • b.    Corrosion Inhibitor
    • c.    Iron control
    • d.    Alcohol
    • e.    Mutual Solvent
    • f.    Clay Stabilizer
  7. Reservoir Rocks Mineralogy
    • a.    Mineral surface area
    • b.    Carbonate Rock
    • c.    Moxie Mineral
  8. Well Choosing Techniques for Acidizing
    • a.    Evaluation Model
    • b.    Transient Pressure Analysis
  9. Acidizing Calculation Examples
  10. Fluid Fracturing and its Additives
    • a.    Fluid Fracturing composition
    • b.    Basic Fluids choosing
    • c.    Other Additives
  11. Proppant
    • a.    Proppant types
    • b.    Proppant Size Specification
    • c.    Fracturing Conductivity
  12. Hydraulic Fracturing Geometric Model
    • a.    Pan American Model
    • b.    PKN and KGD Model
    • c.    Continuum Damage Mechanics Model
  13. Fracturing Pressure Analysis
    • a.    Basic Equation
    • b.    Pressure during Fracturing
  14. Frac Data
    • a.    Formation Break Down
    • b.    Step Rate Test
    • c.    Shut-In Decline Test
  15. Hydraulic Fracturing Design
    • a.    Input Data
    • b.    Hydraulic Fracturing Optimization
  16. Hydraulic Fracturing Operation Evaluation

PARTICIPANTS PRE-REQUISITE :

The participants should have petroleum basic knowledge for Operator, Senior Operator, Junior Engineer and Engineer


WHO SHOULD ATTEND THIS TRAINING?

  • Operator/ Sr. Operator/ Jr. Engineer/ Non Engineer
  • Petroleum Engineers, Reservoir Engineers, Production Engineers
  • Well Service Engineers
  • Everybody or professionals who wants to better understanding and broaden their knowledge from the course subject

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

VENUE :

Hotel Grand Seriti Boutique  Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

  • 20 – 23 June 2011
  • 28 November – 1 December 2011


INVESTATION PRICE/PERSON :

  • Rp 7.250.000/person (full fare)  or
  • Rp 7.000.000/person (early bird,payment one week before event)
  • Rp 6.750.000/person (if there are 3 or more persons from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment