Training HSE

BASIC DRILLING ENGINEERING AND HEALTH, SAFETY & ENVIRONMENTAL CONSIDERATION

BASIC DRILLING ENGINEERING AND HEALTH, SAFETY & ENVIRONMENTAL CONSIDERATION

Bandung | 24 – 26 Juni 2019 | Rp. 7.950.000 Per Peserta
Bandung | 01 – 03 Juli 2019 | Rp. 7.950.000 Per Peserta
Bandung | 12 – 14 Agustus 2019 | Rp. 7.950.000 Per Peserta
Bandung | 09 – 11 September 2019 | Rp. 7.950.000 Per Peserta

Jadwal Training 2019 Selanjutnya …

 

 

OBJECTIVES TRAINING BASIC DRILLING ENGINEERING AND HEALTH, SAFETY & ENVIRONMENTAL CONSIDERATION 

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  1. Memahami prinsip-prinsip dasar dan berbagai perhitungan untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  2. Melakukan diagnosis dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.
  3. Membuat analisis terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.
  4. Melakukan perhitungan-perhitungan kuantitatif untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  5. Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.
  6. Pengetahuan tentang Peraturan Perundangan dalam K3L
  7. K3L dalam Operasi Pemboran

 

PRE-REQUISITE :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

 

MATERI TRAINING BASIC DRILLING ENGINEERING AND HEALTH, SAFETY & ENVIRONMENTAL CONSIDERATION 

1.    Introduction : Rotary Drilling Operations

  • Steps to drilling a well
  • Types of rigs
  • Rig Components
  • Rig Systems

2.    Rheology of Drilling and Completion Fluids

  • Equations and Inflow Performance Relationship Functions of Drilling/Completion Fluids
  • Fluid Types,
  • Fluid Models
  • Introduction to Rotary Viscometer
  • Other Testing Equipment
  • Objectives of Monitoring Fluids

3.    Mud System

  • General Equations and Concepts Diagnostic tests
  • Water based muds
  • Oil based muds
  • Additives
  • Mud handling system

4.    Cementing

  • Tubing Design Functions of cement
  • Cement Types
  • Cement Additives

5.    Oil Field Tubulars and Hydraulics

  • Drill string
  • Casing and tubing
  • Casing classification
  • Stresses on casing
  • Casing setting depth
  • Burst and collapse calculations
  • Wellheads

6.    Drilling System – Pressure Loss Calculations

  • Hydrostatics
  • Buoyancy
  • Flow through pipes and annuli
  • Flow path
  • Pressure loss calculations

7.    Drilling System – Bit & Nozzles

  • Hydrostatics Bit Types
  • Bit Parts
  • Bit Classification
  • Bit Nozzles

8.    Introduction to Well Control

  • Hydrostatics Definitions
  • Causes of kicks
  • Kick indicators
  • Shut-in procedure
  • Well Kill Procedures

9.    Directional Drilling

  • Reasons for directional wells
  • Planning Trajectory
  • Kickoff Methods
  • Survey Methods
  • Survey Calculations

10.    Health, Safety and Environmental Consideration in Drilling Operation

  • Peraturan Perundangan tentang K3L
  • Pengauh Gas Beracun pada Operasi Pemboran
  • Pengaruh  Gas Beracun Bagi Kesehatan
  • H2S
  • Gas Detection Equipments
  • Noise level & exposure in Oil Gas Industry
  • Noise Mapping

 

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

VENUE : 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION : 

4 days

 

JADWAL TRAINING 2019

  1. 24 Jun 2019-26 Jun 2019
  2. 01 Jul 2019-03 Jul 2019
  3. 12 Agust 2019-14 Agust 2019
  4. 09 Sep 2019-11 Sep 2019
  5. 30 Sep 2019-02 Okt 2019
  6. 11 Nop 2019-13 Nop 2019
  7. 02 Des 2019-04 Des 2019

 

INVESTATION PRICE/PERSON :

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment