Training HSE
By September 27, 20140 Comments Read More →

Noise Control Management

Noise Control Management
Yogyakarta | 11-13 Desember 2012 | Rp 8.000.000,- /participant


Latar Belakang

One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers, who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift ((PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.

In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.

Tujuan

Berdasarkan pemaparan di atas sudah jelas bahwa setiap laboratorium telah dirancang untuk memenuhi standar masalah keselamatan dan kesehatan baik sebagai bentuk manajemen untuk menciptakan lingkungan kerja yang aman bagi karyawannya. Dengan terciptanya kepatuhan peraturan di tempat kerja dan nilai K3 akan di harapkan memberi manfaat bagi perusahaan seperti:

  • Untuk mencegah kecelakaan fatal
  • Meminimalkan resiko pekerja menderita cedera akibat penggunaan alat yang salah.
  • Perlindungan pekerja terhadap berbagai bentuk masalah kesehatan seperti infeksi dan toksisitas dari zat berbahaya.
  • Bagaimana upaya pencegahan manajemen untuk melindungi aset-aset perusahaan.
  • Agar para pekerja untuk bekerja lebih produktif, efisien dan menjaga kesehatan dan keselamatan.
  • Sebagai upaya untuk meminimalkan potensi risiko yang timbul dalam kedua petuga Laboratorium, yang lain (pelanggan) dan lingkungan kerja (bisnis)
  • Untuk memenuhi standar sertifikasi, atau untuk memperoleh akreditasi lembaga dan hukum dan peraturan perundang-undangan.

Objective

  1. Learn about noise in industry and the effects of noise to workers.
  2. Learn about noise measurement and analysis techniques including instrumentation
  3. Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry
  4. Learn how to design, monitor and implementing noise control engineering in industry

 

Materi:

  • INTRODUCTION
  • FUNDAMENTALS OF ACOUSTICS
    1. Sound Levels and Decibel Scales
    2. Sound Propagation Outdoors and Indoors
    3. Air and Structure borne Sound Propagations
  • NOISE SOURCES IN INDUSTRY
    1. Fan Noise
    2. Compressor and Pump Noise
    3. Jet Noise
    4. Pipe Flow Noise
    5. Other Noise Sources
  • NOISE MEASUREMENT AND FREQUENCY ANALYSIS
    1. Measurement Methods
    2. Microphones
    3. SLM and Integrating Devices
    4. Time Varying Noise and Spectrum Analysis
    5. Audiometer
  • HEARING CHARACTERISTICS
    1. Hearing Mechanism and Threshold of Hearing
    2. Loudness Levels and Computation
    3. Hearing Loss and Audiometric Test
  • EFFECTS OF NOISE ON HUMAN
    1. Annoyance Levels
    2. Noise Induced Hearing Loss
    3. Noise Dose Calculation
  • NOISE CONTROL TECHNIQUES
    1. Planning a Noise Control Program
    2. Noise Control by Planning and Maintenance
    3. Enclosure and Barriers
    4. Silencers, Mufflers and Attenuators
    5. Noise Control by Room Treatment
  • NOISE CONTROL MANAGEMENT
    1. Priority Planning and Approach
    2. Noise survey and Visual Inspection
    3. Noise Abatement Procedures and Guidelines
    4. Hearing Conservation Program
    5. Noise Control Standards and Regulations
  • TUTORIALS AND PRACTICAL WORKS
  1. Insulation
  2. Noise measurement and frequency analysis
  3. Noise Dose

Peserta:

Safety, Health and Environmental Manager / Engineer, Power Plant and Process Facility, Process and Design, Maintenance Manager / Superintendent / Engineer, Chief Medical Officer

Instruktur:

Dr. Ir. Ida Bagus Ardhana Putra and Team


Metode:

  • Presentation
  • Discuss
  • Case Study
  • Practise
  • Presentation
  • Evaluation

Waktu dan tempat:

  • Yogyakarta
  •  11-13 Desember 2012
  • 08.00– 16.00 WIB


Investasi:

Rp 8.000.000,- /participant (non residensial)*

Special Rate:
Rp 7.000.000,- /participant
(non residensial – min 5 participants from the same company


Fasilitas:

  • Module / Handout
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment