Training HSE
By December 7, 20140 Comments Read More →

AC AND REFRIGERATION : SAFETY AND CONTROL SYSTEM

AC AND REFRIGERATION :  SAFETY AND  CONTROL  SYSTEM

Yogyakarta | 21 – 24 April 2014 | Rp 7.950.000/peserta
Yogyakarta | 20 – 23 Mei 2014 | Rp 7.950.000/peserta
Yogyakarta | 23 – 26 Juni 2014 | Rp 7.950.000/peserta
Yogyakarta | 14 – 17 Juli 2014 | Rp 7.950.000/peserta
Jadwal Training 2014 Selanjutnya …

 

 


PENDAHULUAN :

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.



CAKUPAN MATERI TRAINING :

  1. Basic Concept of AC & DC.
  2. Instalasi dan trouble shooting
  3. Perawatan
  4. Intro To Load Estimating
  5. Load Estimating : Cooling and Heating
  6. Load Estimating : System Design
  7. Mechanical Refrigeration : Cycle Descrip.
  8. Mechanical Refrigeration Cycle Analysis
  9. Ducting Design : Principle & Method
  10. Fundamental of Psychrometric
  11. Psychrometric : Properties of Air ADV.PROG.
  12. Refrigerant Piping System
  13. Water Piping & Pump Selection
  14. Multi Room Buildings,Load CH.SYS.PROG.
  15. Ducting Design : Air Side
  16. Ducting Design : Centrifugal Fan
  17. Ducting Design : Room Air Distribution
  18. Cooling Coil Performance
  19. Air Handling Unit : Central SYS.
  20. Heat Rejection Equipment & Cooling Tower
  21. Control Principles & Method.
  22. Test Merancang Sistem Tata Udara
  23. Centrifugal REF.Equipment
  24. Absorption REF.Equipment
  25. Reciprocating REF.Equipment
  26. Reciprocating Chiller
  27. Large Packaged Equipment

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:

Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.



INSTRUKTUR

Ir. Y. Agus Jayatun, MT.,IPP.

Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.



TEMPAT TRAINING

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)


DURASI TRAINING

4 hari

 

 

TRAINING TIME :

  1. 21 – 24 Januari 2014
  2. 24 – 27 Februari 2014
  3. 24 – 27 Maret 2014
  4. 21 – 24 April 2014
  5. 20 – 23 Mei 2014
  6. 23 – 26 Juni 2014
  7. 14 – 17 Juli 2014
  8. 25 – 28 Agustus 2014
  9. 22 – 25 September 2014
  10. 20 – 23 Oktober 2014
  11. 18 – 21 November 2014
  12. 15 – 18 Desember 2014

 

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FASILITAS UNTUK PESERTA

  1. Modul Training
  2. CD Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. Jaket atau rompi
  6. Tas atau ransel
  7. Foto training
  8. Ruangan training dengan fasilitas full AC dan multimedia
  9. lunch dan dua kali coffee break
  10. Instruktur yang qualified
  11. Transportasi untuk peserta dari hotel penginapan peserta ke hotel tempat training (jika minimal peserta dari 1 perusahaan ada 4 orang)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment